Системы измерения вибрации



VEDA Group of Companies is proud to offer vibration measurement systems and systems for control and monitoring for complex technical objects. These products have been manufactured since 1996 under the trademark Vibro-Shield.

Our systems were installed on every power plant of the USSR, as well as on gas pumping stations, refineries and various metallurgical and chemical plants.



SenSystem - integrated control and monitoring systems for complex technical objects photo The system is used for monitoring the technical parameters of the machinery in real time.
More
Сontrol and alarm system KSA-15 photo KSA-15 control and alarm system is a stationary system designed for continuous measurement and monitoring of vibration parameters on the rotating parts of the machine during its start-up and under load.
More
Displacement transducer electromagnetic ВВТ – 133 for КСА-15 photo Displacement transducer electromagnetic ВВТ – 133 is designed for contactless converting instantaneous values ​​of the gap between the end of the coil and the metallic surface to an electrical signal.
More
Блок вибросмещения photo Блок вибросмещения предназначен для измерения величины размаха вибросмещения и индикации его значения

More
VVK-331 Control and Alarm Device photo Stationary equipment for continuous measurement and control of non-pulse fixed vibrations on non-rotating parts of the machine during its start-up and under load.
More
KSA-15 Power Unit photo The power unit is used for providing electrical DC power for vibration displacement units, axial shift units and VVT-133 gauges.
More
KSA-15 Axial Shift Unit photo The axial shift unit is used for measuring the axial shift of the controlled object’s rotor, displaying its value on the dial test indicator, emergency or warning alarm in case the gap thresholds are exceeded, channel failure alarm, when the power voltage goes beyond the setpoints.
More
VDT-131 piezoelectric vibration gauge for VVK-331 control and alarm device photo Piezoelectric vibration gauge VDT–131 (VDT-231) converts mechanical vibrations into an electrical signal proportional to the vibration velocity.
More
Piezoelectric vibration gauge VDT–231 for VVK-331 Control and Alarm Device photo Piezoelectric vibration gauge VDT–131 (VDT-231) converts mechanical vibrations into an electrical signal proportional to the vibration velocity.
More
Vibration unit for VVK-331 Control and Alarm Device photo Vibration unit is used for measuring RMS values of vibration speed, displaying them on the dial test indicator, emergency and warning alarm signaling in case vibration velocity threshold is exceeded, channel failure alarm signaling in case voltage threshold is exceeded.
More